NetApp updates their StorageGRID Webscale solution

grid001NetApp announced a new version of their object storage solution, the StorageGRID WebScale 10.3.

At a former employer, I first talked with StorageGRID (Bycast at the time) a decade or so ago. At that time, they were focused on medical and healthcare verticals and had a RAIN (redundant array of independent nodes) storage solution.  It has come a long way.

StorageGRID Business is booming

On the call, NetApp announced they sold 50PB of StorageGRID in FY’16 with 20PB of that in the last quarter and also reported 270% Y/Y revenue growth, which means they are starting to gain some traction in the marketplace. Are we seeing an acceleration of object storage adoption?

As you may recall, StorageGRID comes in a software only solution that runs on just about any white box server with DAS or as two hardware appliances: the SG5612 (12 drive); and the SG5660 (60 drive) nodes. You can mix and match any appliance with any white box software only solution, they don’t have to have the same capacity or performance. But all nodes need network and controller/admin node(s) access.

StorageGRID past

grid002Somewhere during Bycast’s journey they developed support for tape archives and information lifecycle management (ILM) for objects. The previous generation, StorageGrid 10.2 had a number of features, including:

  • S3 cloud archive support that allowed objects to be migrated to AWS S3 as they were no longer actively accessed
  • NAS bridge support that allowed CIFS/SMB or NFS access to StorageGRID objects, which could also be read as S3 objects for easier migration to/from object storage;
  • Hierarchical erasure coding option that was optimized for efficiently storing large objects;
  • Node level erasure coding support that can be used to rebuild data for node drive failures, without having to go outside the node data retrieval;
  • Object byte-granular range read support that allowed users to read an object at any byte offset without requiring rebuild;
  • Support for OpenStack Swift API that made StorageGRID objects natively available to any OpenStack service; and
  • Software support for running as Docker containers or as a VM under VMware ESX, or OpenStack KVM that allowed StorageGRID software to run just about anywhere.

StorageGRID present and future

grid003But customers complained StorageGRID was too complex to install and update which required too much hand holding by NetApp professional services. StorageGRID Webscale 10.3 was targeted to address these deficiencies. Some of the features in StorageGrid 10.3, include:

  • Radically simplified, more modern UI, new dashboard and policy wizard/editor, so that it’s a lot easier to manage the StorageGRID. All features of the UI are also available via RESTfull API access and the UI is the same for white box, software only implementations as well as appliance configurations.
  • Simplified automated installation scripts, so that installations that used to take multiple steps, separate software installs and required professional services support, now use a full-solution software stack install, take only minutes and can be done by the customers alone;
  • S3 object versioning support, so that objects can have multiple versions, limited via the UI, if needed, but provide a snapshot-like capability for S3 data that protects against object accidental deletion.
  • grid004ILM policy change predictions/modeling, so that admins can now see how changes to ILM policies will impact StorageGRID.
  • Even more flexibility in DAS storage, so that future StorageGRID configurations can support 10TB drives and 6TB FIPS-140 drive encryption support, which adds to the current drive capacity and data security options already available in StorageGRID.

To top it all off, StorageGRID 10.3 improves performance for both small (30KB) and large (300MB) object get/puts.

  • Small S3 Load Data Router (LDR, 1-thread) object performance has improved ~4X for both PUTs and GETs; and
  • Large S3 LDR (1-thread) object performance has improved ~2X for PUTs and ~4X for GETs.

Object storage market heating up

grid005Apparently, service providers are adopting object storage to  provide competition to AWS, Azure and Google cloud storage for backup and storage archives as well as for DR as a service. Also, many media and other customers managing massive data repositories are turning to object storage to support their multi-site, very large file libraries.  And as more solution vendors support S3 object protocols for data access and archive, something like StorageGRID can become their onsite-offsite storage alternative.

And Amazon, Azure and Google are starting to realize that most enterprise customers are not going to leap to the cloud for everything they do. So, some sort of hybrid solution is needed for the long term. Having an on premises and off premises object storage solution that can also archive/migrate data to the cloud is a great hybrid alternative that takes enterprises one step closer to the cloud.